Click image to view full size image
Dryer Machine for Plastic Injection Machine
1.Dehumidifier, dryer and feeding systems are in one unit, easy to operate and save energy 70%.
2.Top-star 3 in 1 dehumidifying dryer is widely used in precision plastic injection industry including mobile shell and PC connectors.
3.Top-star 3 in 1 dehumidifying dryer performs extraordinarily in optical industry.
Features:
1. Improve the quality of molded parts;
2. Energy saving, high performance;
3. Stable dehumidified air supply at -40 degree dew point;
4. Fully stainless steel shutter for material delivery;
5. Close-looped supply for dehumidified air and material system;
6. User-friendly operation, bilingual (English/Chinese) control panel;
7. Intelligence PLC control panel C/W alarm & Pre-heat settings;
8. In addition to the three optical-grade power-in-one dedicated to clean or purification plant.
Dimensions:
| Model | TCDE-15 | TCDE-25 | TCDE -50 | TCDE -75 | TCDE -100 | TCDE -150 | TCDE -200 | TCDE -300 | TCDE -400 | |
| Hopper Capacity | KG | 15 | 25 | 50 | 75 | 100 | 150 | 200 | 300 | 400 |
| Drying Heater Capacity | KW | 3.5 | 3.5 | 4 | 5 | 6 | 9 | 12 | 15 | 18 |
| Drying Blower Capacity | KW | 0.135 | 0.135 | 0.175 | 0.175 | 0.2 | 1.1 | 1.5 | 2.2 | 3 |
| Conveying Blower Capacity | KW | 0.75 | 0.75 | 0.75 | 0.75 | 1.1 | 1.1 | 1.1 | 1.1 | 1.1 |
| Air Capacity | L/min | 50 | 65 | 70 | 82 | 120 | 155 | 195 | 305 | 410 |
| Power Supply | V | AC380V,3P 50/60Hz | ||||||||
| Control Voltage | V | AC220V, 1P | ||||||||
| Total Power | KW | 4.5 | 4.5 | 5 | 6 | 7.5 | 11.5 | 15 | 18.4 | 22.5 |
| Wires Specifications | 4×4 | 4×6 | 4×10 | |||||||
| Wires Length | M | 6 | ||||||||
| Dimensions | L(mm) | 815 | 815 | 897 | 932 | 968 | 1169 | 1197 | 1630 | 1676 |
| W(mm) | 837 | 837 | 897 | 932 | 968 | 998 | 998 | 1036 | 1120 | |
| H(mm) | 1587 | 1797 | 1898 | 2030 | 2160 | 2264 | 2355 | 2646 | 2660 | |
| Dew point | °C | Below -40 | ||||||||
| Material Pipe Size | inch | 1.5 | ||||||||
| Hopper Receiver | TAL-3SE | TAL-6SE | ||||||||
| Weight | KG | 159 | 160 | 182 | 205 | 217 | 316 | 332 | 400 | 430 |
| Option | 1.Dew-point Indicators 2.Cyclone Separator 3.High Temperature(150°C~180°C) | |||||||||
Photoes:
Dryer Machine for Plastic Injection Machine
